Tale of the Tapes!
Probably the most common “customization” on tennis racquets is the addition of weight! In most cases, that is a good thing. Weight is your friend!
Weight, in this case, is confined to swing weight and of course, overall weight and the placement of that weight and the format being used. We will see two (2) options and try to decide which is the best format.
Option number one below is the most common format for adding weighted tape. You can see that the tape is narrow strips that are placed on either side of the string bed. Even though the length of the tape is different on each racquet, the swing weight is the same on all of them.
Common Weighted Tape Format
The advantage of this format is that the weighted tape can easily be removed or more added if desired without affecting the formatting.
Option number two is rarely requested, but it represents the best-looking result.
Not Easily Modified Tape Placement
However, this format requires much more time and is not easily removed or modified.
This format requires the grommet set to be removed, which, in most cases, is not a problem. In some cases, it will be a big problem! So be sure this is what you want!
The tape must be carefully trimmed between strings and removed without damaging the strings if modification is required to reduce weight. Doing this is not hard but does require a little more time. Adding weight requires removing the string and grommet set if the format is to remain the same, i.e., no narrow strips laid on top of the current tape.
Whichever option you choose will provide the performance boost you want!
Let us know which option you would choose in the comments below!